On Thu, January 19, 2012 5:11 am, David wrote:

> One last question: does the USB peripheral vary greatly between
> devices?  If it's a fairly standard set of registers and buffers then
> it will be a much easier task.

There is just one current ("official" Microchip) USB stack across all the
architectures that have USB. Do all your interaction with USB via the
software stack, and you don't have to worry about differences between
parts.  Some of the lower level files may change, but the stack is there
to make it lots easier.


Matt Bennett
Just outside of Austin, TX
30.51,-97.91

The views I express are my own, not that of my employer, a large
multinational corporation that you are familiar with.
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.