RA3 is input-only, so no go.


> -----Original Message-----
> From: piclist-bounces@MIT.EDU [mailto:piclist-bounces@MIT.EDU] On
> Behalf Of YES NOPE9
> Sent: Wednesday, 18 January 2012 4:49 PM
> To: Microcontroller discussion list - Public.
> Subject: [PIC]:10F322 and Pickit2
>=20
>=20
> Am I correct that hardware-wise the PIC development board for $3.75
> should be able to program another copy of itself ?
>        https://www.microchip.com/forums/m625916-print.aspx
> What is required is software to bit bang emulate a serial port and to
> send programming signals to a second board.
> RA0 and RA1 can be the serial port.
> RA2 and RA3 can drive the programming for the second module.
>=20
> Is this correct ?
> 99guspuppet
>=20
>=20
> --
> http://www.piclist.com PIC/SX FAQ & list archive View/change your
> membership options at http://mailman.mit.edu/mailman/listinfo/piclist


--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.