I'm not sure whats wrong..most likely its how I wired it up

Panasonic AQV252=A0 http://search.digikey.com/us/en/products/AQV252G/255-17=
91-5-ND/571631

5V system, using a 750ohm resistor to drive the LED in it, and I have verif=
ied the signal is driving on and off

I'm switching 12VDC @1.2A inductive load (solenoid)


pins 4/6 are output?=A0 pin 5 is +12V?

Or did I misinterpret the datasheet?

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.