I use a Dremel drill press to drill the holes. The center of the pad=20
etched away makes a good punch mark to get the drill centered. :)

> $20 mini-drill and 1mm tungsten carbide bit is all you need for 99%
> of through-hole. 1.2mm, 1.5mm and 3mm steel bits will cover the 1%
>
> For the minimal investment it is so worth it
>
>
>   =20
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.