> I think that SD is outside the standard. You time is, a lot, more
> valuable so...=20
> throw it away and search for another!

The thing is, you see, I bought two of this particular card. Card #1
went into my camera, Card #2 I use for dsPIC file storage

Card #2 I formatted in a card reader, its MBR ended up in sector 0.
It works perfectly and I can read any file saved to it with a PC=20

Card #1 was formatted by the camera and its MBR is (apparently)
at sector 0x2000

It really puzzles me. Frhed, if dd has made a good file, shows clearly
that the MBR is at sector 0x2000 and yet that sector, as can be seen
in the analyser trace, appears to be full of zeroes. The transition from
high to low right under the first 0 of '0000 2000' is the 0xfe token, so
there's no mistake that what follows is data, and that should be the
'ex.MSDOS5.0' etc string, not zeroes

Either I'm doing something wrong or I don't know something

One of those days

Joe
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.