I just bought a couple of ICD3's for development work, and realized that=20
I need to convert these to the 1x6 0.1 pitch header I use on all the=20
boards I have - I.E. the connector on the PICkit2.

I'm finding lots of circuit boards which do this, and can definitely=20
make a cable if I need to, I'd really rather find something made and=20
solid and robust.

I do feel like I need a flexible cable, and not a PCB header adapter.  =20
OR a adapter, and a 1x6 to 1x6 header cable..

I've also looked for simply a single row (1x6) ribbon cable connector or=20
similar and no luck there either.   I do have some 1x6 connectors which=20
work well for this purpose, but the strain relief leaves a lot to be=20
desired.

Is there a source for these I'm missing?  Or am I just needing to make=20
one myself.

-forrest


--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.