Isaac Marino Bavaresco wrote:
> I may be wrong, but it seems that in the RN-131G Wi-Fi module user's
> manual they refer to the signals UART-RTS and UART-CTS as if their roles
> were swapped:
<snip>
> If things are as they seem, I will have to swap connections of the RTS
> and CTS pins of my PIC, connecting PIC's RTS to module's CTS and vice-ver=
sa.
>=20

I had a quick skim through the PDF and it reads as though they treat
their device as the DTE and the attached micro as the DCE. So just
swapping RTS/CTS should work fine. (RTS is an output and CTS is an input).

George Smith
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.