On 11/16/2011 6:21 PM, PICdude wrote:
> Looking at barrier terminal blocks such as these..
>
> http://search.digikey.com/us/en/products/OSTYK44102030/ED2971-ND/1588796
>
> http://search.digikey.com/us/en/products/3-1437652-9/A98481-ND/1277933
>
> I find it odd that none of these options above specify the dimension
> of the width available for spade terminals.  Molex does, but theirs is
> much larger, so won't work for my application.  I spoke with On-Shore
> technology this morning and the tech person said he'd find out and get
> back to me, but nothing for the whole day so far.  Would any of you
> know?  I'm a bit stalled finishing up an application because of this.
>
> Cheers,
> -Neil.
>
>

The Digikey datasheet for the first link you sent shows the outside=20
width of 8.3mm and the screw is a M3.5  --- doesn't that nail it down or=20
did I miss something?

I did notice that the datasheet is mostly metric except for a=20
screw-torque value of 10.54 Lb-in???
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.