Use:

lWhole =3D fInput;
ulPart =3D ( fInput - lWhole ) * MULTIPLIER;
printf( "The floating point number is: %li.%02li\n",lWhole, ulPart );

instead.


The "(far char *)" part and some of that typecasts are not strictly
necessary.


Isaac



Em 15/11/2011 20:38, rchadwic escreveu:
> I am using MPLab C18 Compiler V3.38 to program an 18C4550; presently tryi=
ng
> to use the ADC to convert voltage on a potentiometer and send it on a ser=
ial
> UART) interface to be displayed on Hyperterminal.=20
> I am using the code suggested in
> http://support2.microchip....aspx?ID=3DSQ6UJ9A003PQX
> <http://support2.microchip.com/KBSearch/KB_StdProb.aspx?ID=3DSQ6UJ9A003PQ=
X>
> to convert a floating point number (ADC voltage), using printf to send th=
e
> result to the serial output.  Code is reproduced below.=20
> I find that the code does not reproduce the ASCII value correctly if the
> floating point number leads with a zero behind the decimal point.=20
> Example:
> Floating point number	2.9984		ASCII	2.99	(good)
> 			3.0018		ASCII	3.18	(bad)
> 			3.095		ASCII 	3.95	(bad)
> 			3.104		ASCII	3.10	(good)
> It looks like the code somehow is dropping leading zeros, but I can not s=
ee
> how or see a way to make it stop doing this.=20
> Does anyone have any suggestions?  Thank you.=20
>
> CODE:  (copied from Microchip note)
> float fInput=3D344.9876; // Pick a number
> long lWhole=3D0; // Stores digits left of decimal
> unsigned long ulPart=3D0; // Stores digits right of decimal
>
> #define MULTIPLIER 100 //(use 1 for no decimals, 10 for 1 place,
> // 100 for 2 places, etc)
>
> #include<stdio.h>
> #include<p18f242.h> // choose your device as needed
>
> void main(void)
> {
> // Set up the USART for output (not required, but since printf sends to t=
he
> USART, it makes the output readable in the output window)
> SPBRG=3D15;
> TXSTA=3D0x24;
> RCSTA=3D0x90;
>
>
> //Convert number from float to fixed point for display.
> //The number is converted to two parts.
> lWhole=3D(long)((float)fInput);
> ulPart=3D(long)((float)fInput*MULTIPLIER)-lWhole*MULTIPLIER;
>
> printf((far char *)"The floating point number is: %li.%li\n",lWhole,ulPar=
t);
> while(1); // wait forever
> }
>
>
>

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.