Em 13/11/2011 03:51, V G escreveu:
> Hey all,
>
> My Strat came with only 21 frets and I can't finish Back in Black or Big
> City Nights (and so on) without that 22nd fret. I looked at the fretboard
> and figured it couldn't be too hard to add my own 22nd fret in there. It
> will fit on the board, but as the end of the fretboard is slightly rounde=
d,
> the 22nd fret will have some over hang (which I'm fine with). I plan to
> score the line where the 22nd fret will be with a knife a few times and
> just use a Dremel rotary tool and grind out a slot. I'd imagine that you'=
d
> put some glue in there and stick that last fret in there. Did I miss
> anything?
>
> Any advice/tips/whatever?


I would use a hacksaw. The Dremel with rotary tool may make too wide a
slot and not completely straight. Besides it is easy to loose control
and scratch your board.

There are small hacksaws that use very thin blades (no more than a
sewing thread). I have one of German make that the thinnest blade is
just 0.2mm wide and the teeth cannot be seen without the help of a
magnifying lens.

Isaac

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.