Hi all,

in my board I have 2 AA batterys that I want to use rechargeable battery in=
stead and connect to
5 volt power coming from outside make it slow charge. the schematic is simp=
le "slow charge"


-+5------A--diode-K---resistor---------Bat+
5v =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =A0 =
=A0 =A0 =A0 =A0 =A0 =A02.4v=A0rechargeable=A0=A0

--------GND----------------------------Bat-=A0

A=3D anode
K =3D cathode=A0


since there is no auto shut down etc I want to use it as continuously slow =
charge but not going to=A0
over charge the battery. my board run time takes 5 ma and when wireless is =
on it takes 100ma
2.4v power is connected to boost circuit and output is 3.3v to pic.
my question is what resistor value should I use that slow charging is going=
 to happen
and no thing will blow or burn?=A0

any idea?

thanks

Andre=A0
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.