Hi all,

This is a really really long shot, but if anyone can help it's you lot :-)

I have selected some FSM8JH tactile switches for a small project.
Try as I might, I cannot find any suitable caps for them. I have checked=20
Tyco/TEs website, Farnell, RS, etc. Just been on the Farnell techincal=20
help service but no luck.
The datasheet is here:
http://docs-europe.electrocomponents.com/webdocs/0912/0900766b80912216.pdf
The shaft is round with a diameter of 3.5mm.
Ideally we would like to keep the cap diameter <10mm, as the buttons are=20
tightly spaced.
So the question is, does anyone know of a suitable cap?
It doesn't have to be an Alcoswitch/FSM series cap (the fact that they=20
don't exist kind of dictates the relaxation of that requirement)
Anything <=3D10mm that will accept a 3.5mm diameter shaft.
Any ideas would be much much much appreciated.
Thanks.

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.