Isaac Marino Bavaresco wrote 2011-11-06 03:55:
> Em 6/11/2011 00:38, jim escreveu:
>> Everything you say makes sense to me.  But the photo that was given
>> shows the PGC and PGD pins going to the oscillator pins on the chip.
>> Surely, this can't be correct, can it?
>>
>> Jim
>
>
> Are you referring to this link? :
> <http://www.dilynamobily.cz/Media/Uploaded/Normal/Problem.jpg>  (image be=
low)
>

That was the "schematic" I was refering to. I didn't saw that as a "photo".

I don't get why the pin numbers in red are of any interest at all.
They are all hard-wired internaly in the header, not ?

And the connections to the target circuit (in this case a crystal
and a pair of caps) are done using the *standard* pin-out (the
pin numbers in black).

Connections from the ICD is done by a pre-configured cable/connector
and you never have to worry about pin-outs.


Jan-Erik.





> I could not see any reference to PGC or PGD in it. Everything seems fine
> there, except for the lack of decoupling capacitor and the floating MCLR.
>
>
> Isaac
>
>
>
>
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.