At 06:23 AM 11/4/2011, jana1972@centrum.cz wrote:
>I bought PIC16f648A - ICD header.But when I try to check its function, fro=
m
>MPLAB IDE V8.80,
>during testing from menu
>
>Debugger - Settings - ICD3 Settings - Status
>
>and here I push the
>Run ICD 3 Test Interface  button
>
>I receive
>
>ICD3Err0063: Test interface PGC clock line write failure.
>  Please ensure that the tester is properly connected.
>Test interface PGD data line write not tested.
>Test interface PGC clock line read not tested.
>Test interface PGD data line read not tested.
>Test interface LVP control line not tested.
>Test interface MCLR level not tested.
>ICD3Err0057: Interface test could not be completed.
>Please contact your local FAE/CAE to SAR the unit.
>
>Is it the problem of PIC16f648A - ICD header?
>
>If I test another header that was supplied with ICD3 , it works OK

As far as I know, the test function works ONLY with the little test=20
adapter that was supplied with the ICD3.  This function exists so=20
that you can verify that the pin drivers are working properly on the ICD3.

One of the common problems with debugging is that when something=20
doesn't work, you don't know what the problem is.  It might be=20
something haywire in the test circuit ** OR ** it might be a problem=20
with the debugger.  Microchip listened to the problems that happen in=20
the field and provided a method for you to test the debugger and make=20
sure that it is working properly.

dwayne

--=20
Dwayne Reid   <dwayner@planet.eon.net>
Trinity Electronics Systems Ltd    Edmonton, AB, CANADA
(780) 489-3199 voice          (780) 487-6397 fax
www.trinity-electronics.com
Custom Electronics Design and Manufacturing

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.