At 01:14 AM 10/25/2011, jana1972@centrum.cz wrote:

>AC162053  - ICD 18P HEADER
>is that really all I need to be used with PICkit3?
>The connector is not the same as with PICkit3 from the picture.
>But may be there can be soldered  Stand-Off connector ( the same=20
>PICkit3 uses) too.
>But if only it works with PICkit3


These header boards all work with: ICD2, ICD3, PICkit2, PICkit3

You will need to make a custom cable that has 6-pin RJ12 connector on=20
one end and 6-pin Single Row Header (pins) on the other end if using a PICk=
it.

dwayne

--=20
Dwayne Reid   <dwayner@planet.eon.net>
Trinity Electronics Systems Ltd    Edmonton, AB, CANADA
(780) 489-3199 voice          (780) 487-6397 fax
www.trinity-electronics.com
Custom Electronics Design and Manufacturing

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.