Jan-Erik ,
Thank you for your reply.
But do you think that=20
AC162053  - ICD 18P HEADER=20
is that really all I need to be used with PICkit3?
The connector is not the same as with PICkit3 from the picture.
But may be there can be soldered  Stand-Off connector ( the same PICkit3 us=
es) too.
But if only it works with PICkit3

Thanks

L.


> As I read it (and as the picture in Microchip DIRECT shows)
> The AC162053 *includes* the PIC16F648A-ICD. And the combined
> thing is also called "Board Assembly Number 02-01695".
>=20
> So what is needed, as far as I understand, is only this item:
> http://www.microchipdirect.com/productsearch.aspx?Keywords=3DAC162053
>=20
>=20
>=20
>=20
> jana1972@centrum.cz wrote 2011-10-25 08:18:
> > Thanks ALL for the reply
> >
> > Can anyone  please let me know what exactly( order numbers) I need to b=
uy
> > so that I am able to debug  PIC16F628A?
> >
> >
> > In Microchip docs I found out  that I would need
> > 1.Header AC162053
> > 2. ICE/ICD Device PIC16F648A-ICD
> > 3 Board Assembly Number 02-01695 ( is that MPLAB ICD2 or MPLAB REAL ICE=
?)
> >
> > Are they all needed( if I already have PICkit3 ?
> > ANd where  can I buy them all?
> >
> > @Dwayne
> >> Be sure to purchase at least two of them -
> > By "at least two of them"do you mean  for the  exactly the same models =
or
> >    two for different models?
> >
> >
> > Thanks
> > L.
> >
> >
> >
> > that lets you keep working
> >> if you 'Oops' the module.  Do note that these modules are covered
> >> under Microchip's SAR program, which means that you can get them fixed
> >> for free if you do make a mistake and fry one.  Basically, you open a
> >> support ticket at Microchip's support website, they eventually get
> >> around to talking to you about the problem (which is easy if you have =
a
> >> 2nd unit that is currently working properly), then they send you a
> >> replacement along with shipping instructions for returning the defecti=
ve
> >> unit.
> >>
> >> Hope this helps!
> >>
> >> dwayne
> >>
> >> --
> >> Dwayne Reid<dwayner@planet.eon.net>
> >> Trinity Electronics Systems Ltd    Edmonton, AB, CANADA
> >> (780) 489-3199 voice          (780) 487-6397 fax
> >> www.trinity-electronics.com
> >> Custom Electronics Design and Manufacturing
> >>
> >> --
> >> http://www.piclist.com PIC/SX FAQ&  list archive
> >> View/change your membership options at
> >> http://mailman.mit.edu/mailman/listinfo/piclist
> >
> >
> >
> --=20
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist


--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.