Hi,
Thanks ALL for the explanation and help
L.
>=20
>=20
> jana1972@centrum.cz wrote 2011-10-21 22:27:
>  > I started programming in assembly language  with PICkit3.
>  > I found out samples that use __config directive but with  PICkit2, tha=
t is
>  > different from PICkit3
>=20
> The CONFIG setting are specific for the PIC processor used and
> has nothing to do with the programmer used to program it.
>=20
> Why do you think that changing programmer from PICkit2 to PICkit3
> will force you to make changes to the CONFIG settings ?
>=20
>  > E.g PICkit2 uses
>=20
> No, no, no... The PICkit2 doesn't "use" any CONFIG settings at all !
> It is the processor who uses the settings, the PICkit2 (or 3) only
> programms them into the processor.
>=20
>  >
>  > how must  I rewrite that config for using with PICkit3?
>  >
>=20
> Not at all.
>=20
>  > Is there any explanation of all those configuration bits?
>  >
>=20
> Of course. The datasheet for your speicfic processor. There is a
> chapter called something like "SPECIAL FEATURES OF THE CPU",
> "Configuration Bits". Didn't that answer your questions ?
>=20
>=20
>  > Thanks for help
>  > L.
>  >
>  >
>  >
>=20
> --=20
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist


--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.