On 17 October 2011 13:50, Michael Watterson <mike@radioway.org> wrote:

>
> If the UART has no "two stop bits" option built in then add "parity bit"
> fixed at "mark". (I think most 16F and 18F have that option as a way to
> get two stop bits).
>
>
The data sheet says "Parity is not supported by the hardware, but can be
implemented in software and stored as the ninth data bit.". So no go :-(
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.