I got it to work by selecting a smaller drill and auto for=20 the diameter. I can't understand why I can't use the values=20 I want. They should pass the DRC easily. Maybe a bug or a=20 feature. I am using the latest Eagle 5.11 (IRC ?) On Sun, 25 Sep 2011, PICdude wrote: > Units perhaps? IE: perhaps you're working in mm or inches in the > library and the other in the board editor? How much different is it? > If by a factor of 25.4, that's a sign. What version of Eagle are you > working in? > > Cheers, > -Neil. > > > Quoting Kevin : > >> >> I am trying to create a custom part in Eagle. I create the >> symbol, then the package, then the device. >> The package looks fine in the library editor. >> >> However, when I drop it on the board the drill size and pads >> appear to be different then the .pac I created and the board >> fails the DRC because the pads are to close. >> >> I am using a .027559 drill with a 0.032 diameter. I have >> created it from scratch 3 times and I am not copying >> anything from another library so I can't figure why eagle is >> changing the drill and pad size. >> >> Can anybody tell me what I am doing wrong ? >> >> Thanks, >> ~Kevin >> -- >> http://www.piclist.com PIC/SX FAQ & list archive >> View/change your membership options at >> http://mailman.mit.edu/mailman/listinfo/piclist >> > > > > --=20 ~Kevin 85 V65 Magna West Chester PA --=20 http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .