Oh, thanks!  I'm used to the [FS] being the normal tag on a few other=20
lists I'm on.

-forrest

On 9/21/2011 12:22 PM, Bob Blick wrote:
> Hi Forrest,
>
> [FS] is distributed as an untagged post, so a lot of people will not
> receive it, as per their settings.
>
> The correct tag would be [AD].
>
> Here's a link to the Piclist info page with a list of recognized tags:
>
> http://mailman.mit.edu/mailman/listinfo/piclist
>
> Friendly regards,
>
> Bob
>
>
>
>
> On Tuesday, September 20, 2011 8:00 PM, "Forrest W Christian"  wrote:
>> So, after numerous samples of different types of paste, I've decided
>> that Indium SMQ90 just plain works the best as far as reliable
>> time/pressure dispensing.  Unfortunately, the minimum order is way more
>> than I can use during it's 6 month official shelf life, so I'm hoping
>> that some of the list might be interested in picking up a few tubes.
>>
>> These are 10cc tubes/syringes, filled with 25 grams of 63/37 SnPb solder
>> paste,  Type 4, in a no-clean, made for dispensing paste - see the
>> indium site for specs on the SMQ90.
>>
>> 6 month refrigerated shelf life, 3 months if stored between 5 and 25*C.
>>
>> Because I'm machine dispensing with these, they don't come with a hand
>> plunger.  You can pick them up fairly cheaply from various sources, and
>> re-use from tube to tube.   You'll also want to get an assortment of
>> needles/tips.
>>
>> I'm looking for around $5 per tube, probably with a bit of per-shipment
>> packaging cost added on for things like ice packs.  These will be
>> available about the first week of October.

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.