Hi Oli,
look  at about the middle of this page:
http://www.microchip.com/stellent/idcplg?IdcService=3DSS_GET_PAGE&nodeId=3D=
1406&dDocName=3Den023805&part=3DDV164120

and you will see what I refer to.
Cheers
Renzo

2011/9/7 Oli Glaser <oli.glaser@talktalk.net>

> On 05/09/2011 23:19, RG wrote:
> > I try to use Mplab ICSP debug  program on a my board or simply using th=
e
> > Microchip Low Pin Count Demo Board.
> > Instructions show how to connect Pickit2 to an IC Header(i.e. the
> AC162961
> > Ic header for the Pic16f690) and plugging it to the DM164020-1 Low Pin
> Count
> > Demo Board.
> >
> > But the Ic Header AC162061 has no connector to plug in an external boar=
d,
> it
> > can be only connect to Pickit2 with a RJ-11 adapter and has only a sock=
et
> in
> > which insert a Pic16f690.
> > Which is the solution?
> >
> > Sincerely Renzo
>
> Sorry if I missed something as I haven't been following all the thread.
> Are you sure you mean the Low Pin Count Demo Board and/or the PicKit2? I
> have one around here somewhere and it has no RJ11 on it, or any
> footprint for one. It connects to the PicKit2 (which it came with) via a
> 6-pin 2.5mm pitch vertical header (no cable, the PicKit2 just plugs in
> directly)
> Or did you mean the ICD2 instead of the PicKit2?
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.