On 05/09/2011 23:19, RG wrote:
> I try to use Mplab ICSP debug  program on a my board or simply using the
> Microchip Low Pin Count Demo Board.
> Instructions show how to connect Pickit2 to an IC Header(i.e. the AC16296=
1
> Ic header for the Pic16f690) and plugging it to the DM164020-1 Low Pin Co=
unt
> Demo Board.
>
> But the Ic Header AC162061 has no connector to plug in an external board,=
 it
> can be only connect to Pickit2 with a RJ-11 adapter and has only a socket=
 in
> which insert a Pic16f690.
> Which is the solution?
>
> Sincerely Renzo

Sorry if I missed something as I haven't been following all the thread.
Are you sure you mean the Low Pin Count Demo Board and/or the PicKit2? I=20
have one around here somewhere and it has no RJ11 on it, or any=20
footprint for one. It connects to the PicKit2 (which it came with) via a=20
6-pin 2.5mm pitch vertical header (no cable, the PicKit2 just plugs in=20
directly)
Or did you mean the ICD2 instead of the PicKit2?

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.