> Bad is that the wire/cable that connects the soldering iron to the
> base unit gets internally broken periodically, so I have had to
> cut/re-wire. =A0It happens mostly at the soldering iron end, though a
> couple times has happened at the base end. =A0However, being at the very
> ends, I only lose a couple inches each time.

Consider adding a strain relief spring coil on the outside, to reduce
bending forces.


          Russell

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.