> >All,
> >
> >I need fairly speedy PCB turnaround in the UK.  Less expensive is better
> >as it's a one off for a charity (from my pocket!) but am prepared to pay
> >to get it within a week or ten days.
> >
> >Size is 80x51mm, the corners are notched to allow it to fit in a Hammond
> >plastic case (1591XXM).  Don't need anything fancy other than basic
> >through-plated vias and soldermask.
> >
> >I'm used to waiting for either BatchPCB or DorkbotPDX, but deadlines
> >don't allow this time.
> >
> >Any recommendations?
> >
> >David
>=20
> www.screenbond.co.uk
> Unusually low tooling costs for a 'conventional' manufacturer (usually =
=A340), and
> fairly good pricing
> on standard turnarounds.
> Can do down to 24hr but this gets expensive
>=20
> For a small 1-off you're probably better off with a pooling service like =
PCBTrain
> though to avoid
> the tooling cost
> http://www.pcbtrain.co.uk/

I have used PCBTrain several times, and found the results to be good.

Another one possibly worth looking at is Spirit Circuits, http://www.spirit=
circuits.com/ who have the "Go naked" service where you can get one PCB fre=
e, if you do only double sided and without silkscreen and solder mask. Have=
n't tried them myself (although I have a couple of one-off PCBs that I do w=
ant to do through them), but someone on here did and reckoned they got a go=
od job. Supposed to be a very fast turnaround for the "go naked" service to=
o.




--=20
Scanned by iCritical.

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.