Sorry for cross posting here and also on the FreeRTOS forum, but maybe
here I'll get more responses.

I'm playing with the idea of porting FreeRTOS 7.0.1 to a PIC18LF45K22
with MPLAB and friends as my time permits.

I know that this architecture is suboptimal for a RTOS, but was
wondering if someone has done something similar already or if someone
would be interested in a joint porting effort.

The code will be contributed to the community.
What I've found so far:

*) In the "standard FreeRTOS download": PIC18_MPLAB which targets a
PIC18F452

*) in the community contributions:
http://interactive.freertos.org/entries/304854-freertos-ported-to-pic18f452=
0
which targets the PIC18F4520

*) in the community contributions:
http://interactive.freertos.org/entries/271252-freertos which targets
the PIC18F4520 (did not yet investigate what's the difference between
the two)

My understanding is, that for the PIC18LF45K22 at least some more
tweaking for the memory banks is needed.

Please advise.

Regards,

Robert

...."German programmers tend to take it as a personal insult when a fault
is detected in code that they have written." - Debora Weber-Wulff
weberwu@tfh-berlin.de [comp.risks 16.94]

My public pgp key is available at:
http://pgp.mit.edu:11371/pks/lookup?op=3Dget&search=3D0x90320BF1


--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.