V G wrote: > On Sat, Jun 11, 2011 at 1:38 AM, Jon Chandlerwrot= e: > > =20 >> Here's an article comparing some low-cost sources >> >> I've used. There are a lot of variables but if your boards are less >> than 10 cm x 10 cm, check out ITead Studio and Seeed Studios which I >> have both used. Details are in the article. >> >> =20 > I've seen that article before. PCBGeek seems to be the cheapest by far. > =20 Actually, it depends on board size. For a 10 cm x 10 cm board, ITead=20 and Seeed will deliver 10 for $33. For the $90 charge at PCBGeek, you'd=20 get 12 of the same size boards from a 200 in. sq. panel. Even with=20 fairly large quantities, ITead and Seeed are going to be the cheapest=20 alternative for boards that fit in the 5 cm x 5 cm or 10 cm x 10 cm=20 categories. Jon --=20 http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .