> those high brightness LEDs take 30mA, but the PIC can't
> provide 30mA on each pin. I'll probably stick a couple of
> small BJTs on there. Maybe two MMBT2222 type.

You can parallel pins. What about the LEDs on PortA ? There's
a maximum drain for the port as a whole. If they were all driven
at the same time it looks to be about 90 - 100mA. Also, I tend
to earth the crystal case because once or twice I'd had radiation
interfering with s/w

Joe
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.