Stop overclocking, and then retest.=20

Henrique Ribeiro de Oliveira <henrique.ro@gmail.com> wrote:

>Hello
>
>I'm using the 18f252 to receive step info from my computer and create a
>stepper-motor speed profile.
>
>There is a MAX232 on a external board for the serial communication (serial
>is grounded to the computer)
>On the PIC board there is only few components to run the microcontroler an=
d
>connectors to send the command
>Using a switching power supply with 24V output and one linear regulator to
>make 5V.
>
>Right now I'm testing this problem with only the PIC connected to my
>computer via serial (No motor/driver hooked up), when I get very close to
>the microcontroler with my hand it start resetting very fast (spam on seri=
al
>communication)
>Already tried changing power supply (used a battery, computer power supply
>and a simple DC wall adapter)
>
>
>
>One more thing, I'm using 12mhz crystal and PLL4x   (overclocked to 48mhz)
>going to buy 10mhz crystal today to check if the clock is the problem
>
>
>Thanks in advance and sorry for any english errors.
>--=20
>http://www.piclist.com PIC/SX FAQ & list archive
>View/change your membership options at
>http://mailman.mit.edu/mailman/listinfo/piclist

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.