Take a look through the Deutsch connector catalog.  They seem to be the
purveyors of all connectors automotive.

DougM

On Wed, Jun 1, 2011 at 7:29 AM, Electron <electron2k4@infinito.it> wrote:

>
> Hi,
> I wasted already 3 days on this, I feel quite desperate now. Didn't find
> it at Mouser / Digikey / Farnell catalogues, checked datasheets, googled
> like crazy for days. Even my back hurts now.. my brain much more.
>
> It's just the connector used on Keihin carburetors from Kawasaki KX 125
> 1999-2000.
>
> Probably same connector used on many other bikes as well.
>
> It's for a series production of a CDI I'm designing, so I cannot ask the
> user to solder wires or cut cables or the like. I need to provide a cable
> to the CDI which will mate correctly with the original carburetor's
> connectors (one for Throttle Position System and the other for PowerJet).
> So I need the manufacturer and product code of connectors that will mate
> correctly with the ones on the user's carburetor.
>
> Here are some pics:
>
> Power-Jet:
> http://bizzetti.info/nse/user/FabioBiz/CDI/connettore/pj.jpg
>
> TPS:
> http://bizzetti.info/nse/user/FabioBiz/CDI/connettore/tps1.jpg
>
> TPS (other view):
> http://bizzetti.info/nse/user/FabioBiz/CDI/connettore/tps2.jpg
>
> Top view of either connectors (they look the same).
> http://bizzetti.info/nse/user/FabioBiz/CDI/connettore/top.jpg
>
> Pitch looks like it is 5.84mm .. however I know that other standard near
> values exist (5.80 and 5.94), it could be one of those too. The limit is
> my eye, even using a caliper.
>
> Thank you very much if you will take the effort to identify those, I don'=
t
> know where to search for them any more.
>
> With kind regards,
> Mario
>
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.