Josh Koffman wrote:
>> http://www.embedinc.com/products/usbprog/eusb3_top.gif, and the
>> bottom at http://www.embedinc.com/products/usbprog/eusb3_bot.gif.
>
> Is that directly output from Eagle as GIF? I like the addition of the
> scales!

I have Eagle export the drawing as a TIF file, then convert to GIF with my
own tools.  I don't trust Eagle to pick the right choices in the GIF.  The
colors I use are all deliberately gray scale, so I set up the LUT in the GI=
F
to only the gray scale range.  I haven't actually tried it, but I expect
Eagle wouldn't do that.

The scales and other stuff are put there by my GRID_BRD ULP.  After that,
you run either the GRID_TOP or GRID_BOT script to have it show the top or
bottom of the board.  The ULP sets up everything so that selecting the view
is just a matter of setting the colors differently.

These ULP and scripts, and a bunch of other stuff, is available in my Eagle
Tools release at http://www.embedinc.com/pic/dload.htm.


********************************************************************
Embed Inc, Littleton Massachusetts, http://www.embedinc.com/products
(978) 742-9014.  Gold level PIC consultants since 2000.
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.