On 16/05/2011 15:20, Brendan Gillatt wrote:
> You may have some luck running a condenser mic at a lower voltage than
> the nominal 40v. This may increase the safety somewhat.
>

That would be external power, not the actual internal operating volts.=20
the actual operating volts depends on if Electret or true condenser mic.

You don't want to run the 48V desk power into the wet at all. Use no=20
phantom power and isolation transformer with self powered mic if=20
electret or condenser.
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.