I like these guys:

http://search.digikey.com/scripts/DkSearch/dksus.dll?Detail&name=3DPB311-ND

There's a couple in my dryer to run the motor and the heating element, so
they are at least good enough with inductive loads to run the motor.

I also drive solenoids and a skillsaw with them (long story), but at 120v.

DougM

On Thu, Apr 21, 2011 at 10:42 AM, alan smith <micro_eng2@yahoo.com> wrote:

> Most the relays I've found do not include an inductive load spec
>
> 24VDC coil
> 20A contacts, inductive
> 277VAC switched voltage
> SPST-NO
>
> Ive found several that spec the contacts resistive, but not inductive.  I
> know that inductive is hard on the contacts, for arcing, so I am surprise=
d I
> havent seen it on the data sheets
> --
> http://www.piclist.com PIC/SX FAQ & list archive
> View/change your membership options at
> http://mailman.mit.edu/mailman/listinfo/piclist
>
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.