Josh Koffman wrote:
> I'm considering using a PIC18f25K22 in an upcoming project. I chose
> this chip because I require two UARTs. I just noticed that it has the
> RX/TX for one the UARTs multiplexed on the PCG/PCD pins used for in
> circuit debugging. As far as I know (and I'd love to be proven wrong)
> that means I can't use both UARTs while in debug mode. My current plan
> is to develop half the code (call it the transmit code) on the other
> UART, change that code to point to the disabled UART, write the
> receive code on the exposed UART, then compile in release mode and
> hope they both work. I would be debugging each half separately but I'd
> be unable to do them together.

I haven't looked, but there is probably something like a 18F45K22.  Use tha=
t
for debugging.


********************************************************************
Embed Inc, Littleton Massachusetts, http://www.embedinc.com/products
(978) 742-9014.  Gold level PIC consultants since 2000.
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.