Hi all,

I mentioned these LCDs a while back and got a 16x2 from Mouser

http://www.lcd-module.com/products/dog.html

Had great hopes for it in a particular project

Do you think I can get a flicker of life out of it ? Every other LCD
I've worked with has at least some indication of power applied,
such as blocks or 8888, but not this one/type. Completely blank

Been looking around for initialisation code and found several people
with the same problem and replies that seem to be all over the place
wrt to the ST7036 datasheet, yet these replies say that their code
works

I've spent quite a bit of the weekend with the wretched thing and
tried so many permutations of "working code" I thought I would
have gotten a result by sheer accident

But no

Does anyone here have actual working tested verifiable assembler
code to get "Hello World" on a DOGM 16x2 ?

TIA

Joe
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.