> 3. =A0If LEDs were hand inserted prior to wave soldering I'd assume that
> use of a manual cut and cinch tool would be a minimum in order to
> stabilise LEDs from wave soldering process.
> Yes?

I have been trying to work out exactly what "cinch" refers to from the cont=
ext.

I have come to the conclusion that it is some type of lead
manipulation to help make the lead fit tight in the hole.  Perhaps
with a hammer or pliers to flatten the leads at the reguired position
so when the component is placed it will stop at the "interference fit"
point.

Anywhere near the mark?

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.