> > I've been looking at Samtec for their 0.050" pitch connectors
> > (dual-row 0.050" x 0.050" and 0.050" x 0.10" parts).  The problem is
> > that the 0.050" x 0.050" gull-wing receptacle is too narrow (the
> > connector leads don't quite reach the SOIC pads) and the 0.050" x
> > 0.10" gull-wing receptacle appears to be too wide.
> >
> > I'll bring in samples anyway but I'm still looking for alternative sugg=
estions.
>=20
> Hmm, my immediate thought was something like the Samtec FSI series inter-=
board
> connectors, but they are 1mm pitch, not 1.25mm, and much wider than 0.150=
"

I had a look at a catalogue that arrived yesterday, and found these.

http://www.toby.co.uk/content/catalogue/products.aspx?series=3DSPN2-xx-R-xx=
x-xxx

which look like they may fit the pads of a 150 mil package. Then the corres=
ponding socket can go on the piggyback board.

http://www.toby.co.uk/content/catalogue/products.aspx?series=3DB28b-2xXX-BG=
BB1-G

They also carry the Samtec range, and claim these to be equivalent of the S=
amtec FLE series ...

http://www.toby.co.uk/content/catalogue/products.aspx?series=3DFLE-1xx-01-G=
-DV-xx

Samtec are also likely to have an equivalent pin header.
--=20
Scanned by iCritical.

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.