Hi Bob,

On Fri, Mar 11, 2011 at 12:24 AM, Bob Blick <bobblick@ftml.net> wrote:
> On Fri, 11 Mar 2011 00:11 +0530, "Manu Abraham" wrote:
>> Hi,
>>
>> With an 18F4550, is it necessary to pullup /MCLR with the 10k resistor
>> when using ICD2 in debug mode ?
>
> Hi Manu,
>
> I don't know if there is an official published schematic for the ICD2,
> but the schematics I have seen for it do not float /MCLR under any
> conditions. So I would say in that case you are OK not having a pullup
> on your target.

Thanks, for the detail;

Just to make myself feel a bit safer: even in those cases, where /MCLR
is not floated, does it hurt if there is the regular 10k pullup ?

Best Regards,
Manu
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.