=20
Hi, all,=20

to get a quick solution from my "corrupt eeprom problem" I tried to simply
remove the possibility to change mode, means there are two software codes,
one for mode1 and one for mode2 (I don't like this, but it would be a
possibility).

I now tried to flash the changed software, but for another part of my
circuit can only be operated from no more than 3,3V I crashed this part by
applying 5V (no big surprise!).

When looking at several application notes I only found the possibility of
ICSP with Vdd=3D5V! Do I miss something? My ICSP hardware is a PICStart+ (I
love it!) with a self made adapter.

To let you know: In series production the PIC is flashed with Vdd=3D5V when
the other part is still not attached. And it is much work to disassemble it=
!

My questions:

Is there a possibility to make flashing with Vdd=3D3,0V on a 12F519?

If possible at all, is it reliable, to just use a voltage divider for Vdd,
ICSPCLK and ICSPDAT? I assume I have to keep the Vpp at those 12,5V (which
makes no problem in my case)

Thanks for help and best regards

Peter

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.