I would have picked VME bus (now VPX?) But the op is trying to do it with n=
o connectors (card edge) on his board.

---- Original Message ----
From: "Geo" <buggiesmith@gmail.com>
Reply-To: "Microcontroller discussion list - Public." <piclist@mit.edu>
Date: 02/18/11 9:47 AM
To: "Microcontroller discussion list - Public." <piclist@mit.edu>
Cc:=20
Sub: Re: [EE] good source for backplanes?
alan.b.pearce@stfc.ac.uk wrote:

> I suspect that a backplane using DIN 41612 connectors would suit the OP f=
ine,=20
 >as the dimensioning of the connector is defined by the rack mount=20
 >system. The single row 32/dual row 64/triple row 96 pin format will=20
 >stand on end in a 3U rack unit. The nominal board size of 100mm wide=20
 >will go in 3U rails on edge using these connectors.

Vero do a selection (at a price):-
<http://www.verodirect.com/products.asp?subcategory=3DDouble+Sided+Uncommit=
ed+Backplane&category=3DBackplanes+and+Extender+Cards>
or if that wraps:-
http://tinyurl.com/5twzozq


--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

---- End Original Message ----
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.