I'm building a dedicated system that will require a backplane.  each card
will be 2.85 inches high so taking some off for the edges leaves me 2.6
inches.  If I get a .100 pitch .062 thick card edge connector I could handl=
e
52 lines.

But what I don't want to do is lay out, fab and build my own backplane.

Is there some source for generic backplanes that might have something
similar?  Anywhere from 4-6 connectors spaced about an inch apart would be
perfect.

I looked at the old PC busses and even the S100 busses and thus spent a
wonderful couple of hours in the time machine, but didn't come up with
anything.

Thanks,

DougM
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.