>MX-5010 Vs. PS-900 Vs. MFR-2211

Those are all from Metcal/OKI. The major difference is RF frequency. Size o=
f the=20
power supply, max. power and size of tips may be different.

PS-900 and MFR-2211 use 450~470KHz, while MX-5010 uses 13.56MHz.=20
Retail price:
PS-900: US$250~300. (1 channel, 90W max. input, 60W max. output per channel=
)
MFR-2211: US$550~750 (1, 2 channel, 130W max. input, 60W max. output per=20
channel)
MX-5010: US$650 and above (2 channel, 125W max. input, 80W max. per channel=
,=20
assume two channel are not consume max. power at the same time.)

 Funny N.
Au Group Electronics, http://www.AuElectronics.com
http://www.AuElectronics.com/products
http://augroups.blogspot.com/




________________________________
From: cdb <colin@btech-online.co.uk>
To: Microcontroller discussion list - Public. <piclist@mit.edu>
Sent: Sat, February 12, 2011 11:11:04 PM
Subject: Re: [OT]Metcal / OKI solder stations: MX-5010 Vs. PS-900 Vs. MFR-2=
211.

Whilst these don't work quite the same way as Metcal/Thermaltronics irons,

JBC and Goot have some heater in tips irons.

I'm thinking of getting one from www.howardengineering.com

Colin
--
cdb, colin@btech-online.co.uk on 13/02/2011

Web presence: www.btech-online.co.uk =20

Hosted by:  www.justhost.com.au







--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist



     =20
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.