On 15/01/2011 21:41, Kerry Wentworth wrote:
> The reason usually stated for not using Brother is "new Brother printers
> use a higher temperature toner", too high to transfer with a laminator.
> An iron on max will smear normal toner, at least mine did.  I've never
> tried a Brother printer, old or new.
That's why I recommended preheating PCB.

many laminators are too cool or not able for 1.6mm PCB

Also the smearing is due to too much speed and pressure.
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.