?> There's always the PM3 if you are intending to program a lot of chips
> (which at $895 is a big leap, but a "real" production programmer, then
> there's the $200 or so for each package adaptor if you need them - TQFP,
> QFN etc)

> We do in circuit programming with the PM3. We just made cables that
> convert the header on the PM3 to a SIP-6 we put on our boards.


I was wondering if you could share the source of the female connector that=
=20
mates with the header on the PM3.

Up to now I have always used the included cables that were modified to fit=
=20
my needs. But lately the connectors start to wear out a little bit.

Thanks!

Daniel...



--=20
FCC Rules Updated Daily at http://www.hallikainen.com - Advertising
opportunities available!
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist=20
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.