On 22/12/2010 22:39, IVP wrote:
>> I usually use Fotoboard (positive resist coating) from Mega
>> (very good site for PCB stuff), which has always produced
>> excellent results
> Oli, one of my Things To Do in the New Year is to try and find a
> local supplier for Riston film and see if it's possible to make my own
> photo-resist board. I've a very good friend in the laminating caper
> who might be able to pull some strings. And possibly get chummier
> with my board house to maybe get useable panel scraps. Hand-
> drawing etch-resist is OK for prototypes and one-offs but printing
> would be much more convenient
>
> Joe

Sounds like a good idea, I'd be interested to hear how you get on there.=20
Pretty sure printing rather than hand drawing will save you a fair bit=20
of time.
I've often thought about ways of making the PCB (prototyping) process=20
easier/cheaper/quicker - got a few ideas but no time to explore them at=20
present (that's always the problem.. too many ideas/too little time.. :-)  =
)


--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.