Kerry Wentworth wrote:
> It really isn't that hard.  Print the artwork on to magazine paper
> with a laser printer, transfer to copper clad using a laminator, and
> etch.  I can reliably do .5mm spacing, which is as small as I can
> comfortably do hand soldering.

Note that's a whopping bit 20 mils.  Your not going to do a .65mm (26 mil)
pitch QFN package with that as the OP is trying to do.  He either needs to
use a larger package or have the board professionally made.

Maybe someone that's really really good with homemade PC boards can do this=
,
but that's going to take some experience and experimenting at best.


********************************************************************
Embed Inc, Littleton Massachusetts, http://www.embedinc.com/products
(978) 742-9014.  Gold level PIC consultants since 2000.
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.