At 02:47 PM 15/12/2010, you wrote:
>On Wed, 2010-12-15 at 05:51 -0500, V G wrote:
> > On Wed, Dec 15, 2010 at 4:48 AM, <alan.b.pearce@stfc.ac.uk> wrote:
> >
> > > My reaction exactly. It seems solarwind is wanting to do things with =
3
> > > components when using 5 or 6 results in a much better solution.
> > >
> > > Considering that everything for a switching regulator can be got 'off
> > > the shelf' and you don't need to wind bespoke inductors, why shy away
> > > from switchers?
> > >
> >
> > Haha. Too late for 3 or 4 components. This thing is becoming bigger tha=
n I
> > intended. I have comparators, FETs, voltage dividers, linear=20
> regulators (for
> > voltage reference), and a switching regulator with all associated=20
> components
> > in my block diagram already.
>
>Use a single cell (or two) boost (i.e. a switcher designed to run off a
>single LiIon cell), don't need any of the other stuff then.
>
>TTYL

Patient: It hurts when I <...>

Doctor: Don't <...>

>Best regards,

Spehro Pefhany --"it's the network..."            "The Journey is the rewar=
d"
speff@interlog.com             Info for manufacturers: http://www.trexon.co=
m
Embedded software/hardware/analog  Info for designers:  http://www.speff.co=
m



--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.