Think about that for just a second?=20

If I /knew/ the value of ADRES to inject, why would I be trying to find it?

--
James Newton
1-970-462-7764=20

-----Original Message-----
From: piclist-bounces@mit.edu [mailto:piclist-bounces@mit.edu] On Behalf Of
John Temples
Sent: Saturday, November 20, 2010 16:24
To: Microcontroller discussion list - Public.
Subject: RE: [PIC] pickit2 unreliable debug 12F675

On Sat, 20 Nov 2010, James Newton wrote:

> In this specific case: I have a pot connected to AN0 and set so that 2.5v
is
> on the pin. Now I want to know exactly what ADC count the chip is reading
so
> I can set that as the midpoint in my code and turn the motors one
direction
> when the voltage is lower and the other when it is higher.
>
> With a debugger, I simply read the ADC output register and I'm done.
>
> How would you get that value without the debugger?

The simulator has a register injection feature that reads hex values
from a file that are injected into ADRES over time.

--
John W. Temples, III
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist

--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.