On 02/11/2010 18:40, Charles Rogers wrote:
> From: "Olin Lathrop"
>> For most common parts I have two or more versions of them in the library=
,
>> one for each of the common rotations.  For example, I have both vertical
>> and
>> horizontal resistors premade.  That way you don't end up with a mess lik=
e
>> your R5, R4, etc.  If you don't have a pre-rotated part, then you have t=
o
>> "smash" the part and rotate and position the text manually.  That's part
>> of
>
> This is why a lot of people don't use Eagle.  It is a third rate program
> that
> is used because its free to start with.  I used it five years before I
> finally
> found a good cad program.

Which is that good it deserves naming! :)

Honestly, I'm open to suggestions but I can't mind read..

David
--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.