From: "Olin Lathrop"
> For most common parts I have two or more versions of them in the library,
> one for each of the common rotations.  For example, I have both vertical=
=20
> and
> horizontal resistors premade.  That way you don't end up with a mess like
> your R5, R4, etc.  If you don't have a pre-rotated part, then you have to
> "smash" the part and rotate and position the text manually.  That's part=
=20
> of


This is why a lot of people don't use Eagle.  It is a third rate program=20
that
is used because its free to start with.  I used it five years before I=20
finally
found a good cad program.

CR=20


--=20
http://www.piclist.com PIC/SX FAQ & list archive
View/change your membership options at
http://mailman.mit.edu/mailman/listinfo/piclist
.