Quoting Olin Lathrop : > David wrote: >> Route: http://tinyurl.com/33kxen6 > > I see some things, possibly unconnected islands, but it's hard to tell on > this small image. There are indeed. You are the second person to comment on this, so I =20 will turn that off on the pour. >> Silk: http://tinyurl.com/3575prt > > There appears to be some mirrored writing in the top right corner. That's on the underside. I simply use it for my own future reference =20 to pull up the right project. Two sided silkscreen at my current =20 board maker is standard. > What's > the point of the elaborate graphic under the USB connector? It won't hel= p > the manufacture install it correctly and it can't be seen once installed. > This is also apparently more than just the silkscreen since SMD pads are > shown. No idea! I didn't design the USB connector, it is from one of the =20 standard libraries. > Again, it would be better to post the Eagle .brd file instead of or in > addition to these files. Without being able to poke around and really se= e > what's on what layer, I don't feel I can say much. OK, that advice and your information about PDF and orientation are all =20 taken. Once I have fixed other errors tonight I will upload them. Thanks. David --=20 http://www.piclist.com PIC/SX FAQ & list archive View/change your membership options at http://mailman.mit.edu/mailman/listinfo/piclist .